interface pad 6+1 | medium soft | 150mm x 10mm
Description
Interface Pad in addition to the preliminary work can be also used for finishing delicate arches and profiles. Just as with the case of pads, we have used European certified components in the manufacturing process of the interface pads as well. This makes the product resistant to dust, water, and heat. All our interface pads are equipped with a perforation system similar to those commonly used in sandpaper. As a result, the interface pads are compatible with round sandpaper discs fastened with hook-and-loop tape. The interface pad foams come in four degrees of hardness so that you can freely select the optimum fit for your work and the desired results.
Properties
Red foam.
Close-cell foam.
Light polishing/Medium finishing.
In comparison to typical finishing pads, the red foam is characterized by increased stiffness and quite high resistance to tearing. The foam properties make the pads ideally suited for finishing or polishing soft paints. We recommend using red pads after removing all deep scratches, especially when finishing hard coatings.
Size and index
Size:
- 150mm x 10mm
Index:
- IVMR1241150
Technical drawing
